The reason for the failure of the strapping machine after the strapping is tight and the troubleshooting method:
There is a lot of circumstances that can cause this situation without being cut after tightening.
1. Reason: The elastic adjustment is too tight. ★Remedy: Adjust loose.
2. Reason: The slippery slide or the slippery belt has oil, which is located near the elastic adjustment. ★Remedy: The oil must be removed and wiped off.
3. Reason: The belt is too tight. ★Remove method: Lower the belt drive seat down, or adjust the motor to the back.
4. Reason: The gap between the retracting rollers is too large. ★Remedy: Change to a thinner strap.
There is a lot of circumstances that can cause this situation without being cut after tightening.
1. Reason: The elastic adjustment is too tight. ★Remedy: Adjust loose.
2. Reason: The slippery slide or the slippery belt has oil, which is located near the elastic adjustment. ★Remedy: The oil must be removed and wiped off.
3. Reason: The belt is too tight. ★Remove method: Lower the belt drive seat down, or adjust the motor to the back.
4. Reason: The gap between the retracting rollers is too large. ★Remedy: Change to a thinner strap.
Sampling Cotton Swabs,Nylon Flocked Swab,Small Foam Tip Swab ,Cotton Tipped Swabs
Hunan Kangfutai Medical Devices Co., Ltd. , https://www.3kfut.com