1. Can I attach a device to the labeling machine to detect whether it is missing or stuck incorrectly?  
    can. Now there is a CCD camera device that can detect whether the tag is displaced or not, and thus determine whether the tag is front or back or missing on the object. At this time, the electric eye sends an electric signal to the solenoid valve through the circuit to make the cylinder The detected incorrectly labeled object is pushed out of the conveyor belt.  

2. When the labeling machine is equipped with a production line, what issues should be considered?  
*   Label winding  
*   Material operation and labeling direction  
*   Production line output and line speed  
*   Conveying direction and operating orientation  
*   Conveying surface height  
*   Are there any special requirements for connection to other machines on the production line?  
*   Is there enough space in the production line reserved for the labeling machine?  
*   Is the placement of the sticker on the production line and on the labeling machine ( standing or lying ) consistent?  

3. What are the requirements for labeling multiple objects using the same horizontal labeling machine?  
     If a plurality of bottles belong to the same classification group, more time, only need to replace the corresponding separation wheel and the guide plate can be re-produced and the production efficiency is unchanged. For different classification groups, the conveyor belts need to be replaced under normal circumstances. The cross-group products with different diameter differences can be labelled on the same conveyor belt through non-standard customization, but the labeling speed index will be reduced.

4 , through which devices of the labeling machine to achieve the labeling head around   X , Y , Z   Do the rotation adjustment in three directions?
  The labeling machine has two components: a beam rotating mechanism and a labeling head adjusting base. By adjusting the two components, the labeling head can be around X , Y , Z.   The rotation of the three directions within the necessary angles ensures the labeling of the different shapes of the stickers from different orientations.  

5, the label on the labeling machine can be used in a printing machine is printing   (A , C , E , F) , the printer that can be used to print on the sticker is   (C , E)  
A)   Hot stamping machine B)   Hot ink wheel printer C)   Small character inkjet printer  
D)   Large character printer E)   Laser code printer F)   Heat transfer printer
　 　　 
6. When do I need to print on the label? How many printing methods are there?
  The stickers are generally " batch number, date of manufacture, expiration date ", etc., and these contents need to be printed on the label. What are the methods? Generally, there is a hot stamping type printing machine, or the inkjet printer and the code printer are connected to the labeling machine for instant printing, and another method is to use the heat transfer printing method. Coding, radio coding and thermal transfer printing can be printed with some constant information ( such as serial number ) . Hot foil ribbon printing can only change the print information by replacing the copper alloy particles on the printhead.  

7. Why do users need to provide samples ( stickers, labels ) according to technical requirements ?  
     Because the manufacturers have changed the shape of the stickers due to anti-counterfeiting or special features, the materials, labeling, labeling / stroking actions on the labeling machine are closely related to the shape of the objects to be attached. The length, width, height ( diameter, height ) size of the design, or the use of similar sample simulation test machine, can not always reflect the real state of the customer sample on the labeling machine, hidden problems often have to wait until acceptance It was discovered that it was not good for both sides. Therefore, customers are generally required to provide samples. If they are not available, they should be stated in advance as the acceptance status of our sample at the time of acceptance.

8. What are the reasons and solutions for the labeling machine ?  
Reason for solution:
*   Measuring the position of the electric eye is not correcting the position of the measuring object  
*   Measuring electric eye failure, changing the object of the measuring object  
*   Labeling the label of the label is not tight enough to adjust the pull paper
*   The color of the sticker cannot be replaced by the electric eye to replace the electric eye with the appropriate model function.  
*   The feeder is not open to open the feeder  
*   Power is not turned on  

9. What is the cause of wrinkling after labeling?  
Reason for solution:  
*   The delivery speed is faster than the material running surface speed and the bid speed is reduced.  
*   The bidding is too early to shift the object to the right  
*   The pre-out label is too long to adjust the length of the pre-marking  
*   The label speed is not fast enough to adjust the speed of the label  

10 , why is the label continuously?  
Generally, the position of the measuring electric eye is incorrect or the measuring electric eye is faulty. Please adjust the position of the label electric eye.  

11. What causes the label not to be attached?  
Reason for solution:
*   The bidding speed is too slow to increase the bidding speed  
*   Measuring the position of the electric eye is not correcting the position of the measuring object  
*   Pre-out label is not long enough to lengthen the reserved label length  
*   The measuring electric eye is too far from the target end to shift the measuring object to the right.  
*   The measuring object does not detect the material adjustment and the measuring eye  
*   Material spacing is too small to increase material spacing

4G CCTV Camera

4G CCTV Camera, low power consumption,4g Outdoor Wireless Camera,Solar Camera,Solar Powered Wifi Ip Outdoor Camera

Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcameras.com