Ultrasonic vibrating screening filter is a new generation of screening and filtering equipment developed by our company through technical cooperation. It can be widely used in fine screening and filtration industries such as pharmaceutical, metallurgy, chemical, non-mineral, food, etc., with screening and filtration precision. The characteristics of high mesh and non-clogging of the mesh have truly solved the screening problem caused by agglomeration, static electricity, strong adsorption and plugging mesh, and are a major technological breakthrough in the domestic screening and filtration industry.
First, the general structure of ultrasonic vibration screening filter.
1. Upper frame 2, holding body 3, connecting rod 4, supporting body 5, screen 6, transducer 7, discharge port 8, shock absorbing spring 9, vibrating body 10, base 11, ultrasonic generator 12, wire Second, the working principle:
This machine superimposes the ultrasonic high-frequency vibration directly acting on the screen on the basis of the three-dimensional vibrating screening filter. The ultrasonic screening filter fixes the ultrasonic transducer to a stainless steel frame and is in close contact with the screen. The superelevation frequency of the transducer is transmitted to the entire screen through the conversion plate while conducting the powder particles to keep it in suspension, preventing them from clogging the mesh. Thereby, the screening efficiency is improved, the number of screenings is reduced, the screening time is shortened, and the product quality is improved.
Third, the work characteristics:
1 superimposed ultrasonic high frequency vibration, greatly reducing the noise of the screening machine.
2 multi-layer screening, can share a single ultrasonic generator power supply.
3 high screening efficiency, short screening time, improve product quality.
4 Increased screening fineness level 5 does not change the characteristics of the screened product.
Fourth, the use of instructions:
1. Check whether the sealing rubber tube protecting the ultrasonic transmission line inside the machine body is locked before operation.
2 Whether the fixed connection on the screen frame is locked.
3 Check if the power supply of the ultrasonic generator is 220V and ensure that there is grounding protection.
2. Installation 1 According to the ultrasonic generator connection line, insert the interface and lock it so that the ultrasonic generator power supply is properly connected to the ultrasonic interface of the machine.
2 Turn the fine-tuning knob on the ultrasonic generator power supply to zui, turn on the ultrasonic generator power switch, and observe whether the ammeter is abnormal. (Conventional current should be less than 200mA).
3 Debug the three-dimensional vibrating screening filter to make the material running track reach the ideal state.
(See the "Three-Dimensional Vibrating Screen Filter Instructions" for the method)
4 Start the three-dimensional vibrating screening filter, and fine-tune the ultrasonic generator on the power supply to fine-tune the knob to make the screen reach an ideal state. (current should be less than 200mA)
5 evenly feed into use.
3, Note 1 The power supply used by the ultrasonic generator power supply 220V, 50HZ and ensure that there is grounding protection.
2 single layer mesh screening, must be evenly charged.
3 Regularly check whether the sealing rubber tube protecting the ultrasonic transmission line inside the machine is locked.
4 The device should be placed away from the calculator.
5 Failure occurred to report to our company.
Xinxiang Xinhe Machinery Technology Department
First, the general structure of ultrasonic vibration screening filter.
1. Upper frame 2, holding body 3, connecting rod 4, supporting body 5, screen 6, transducer 7, discharge port 8, shock absorbing spring 9, vibrating body 10, base 11, ultrasonic generator 12, wire Second, the working principle:
This machine superimposes the ultrasonic high-frequency vibration directly acting on the screen on the basis of the three-dimensional vibrating screening filter. The ultrasonic screening filter fixes the ultrasonic transducer to a stainless steel frame and is in close contact with the screen. The superelevation frequency of the transducer is transmitted to the entire screen through the conversion plate while conducting the powder particles to keep it in suspension, preventing them from clogging the mesh. Thereby, the screening efficiency is improved, the number of screenings is reduced, the screening time is shortened, and the product quality is improved.
Third, the work characteristics:
1 superimposed ultrasonic high frequency vibration, greatly reducing the noise of the screening machine.
2 multi-layer screening, can share a single ultrasonic generator power supply.
3 high screening efficiency, short screening time, improve product quality.
4 Increased screening fineness level 5 does not change the characteristics of the screened product.
Fourth, the use of instructions:
1. Check whether the sealing rubber tube protecting the ultrasonic transmission line inside the machine body is locked before operation.
2 Whether the fixed connection on the screen frame is locked.
3 Check if the power supply of the ultrasonic generator is 220V and ensure that there is grounding protection.
2. Installation 1 According to the ultrasonic generator connection line, insert the interface and lock it so that the ultrasonic generator power supply is properly connected to the ultrasonic interface of the machine.
2 Turn the fine-tuning knob on the ultrasonic generator power supply to zui, turn on the ultrasonic generator power switch, and observe whether the ammeter is abnormal. (Conventional current should be less than 200mA).
3 Debug the three-dimensional vibrating screening filter to make the material running track reach the ideal state.
(See the "Three-Dimensional Vibrating Screen Filter Instructions" for the method)
4 Start the three-dimensional vibrating screening filter, and fine-tune the ultrasonic generator on the power supply to fine-tune the knob to make the screen reach an ideal state. (current should be less than 200mA)
5 evenly feed into use.
3, Note 1 The power supply used by the ultrasonic generator power supply 220V, 50HZ and ensure that there is grounding protection.
2 single layer mesh screening, must be evenly charged.
3 Regularly check whether the sealing rubber tube protecting the ultrasonic transmission line inside the machine is locked.
4 The device should be placed away from the calculator.
5 Failure occurred to report to our company.
Xinxiang Xinhe Machinery Technology Department
Worldhawk can provide precision filters for many applications, including Interference Filter, Cut Off Filters, UV Bandpass Filter, Narrow Bandpass Filter, ND Filter, Negative Filter or Notch Filters, Color Glass Filter.
Optical Filters are used to selectively transmit or reject a wavelength or range of wavelengths. Optical Filters are used in applications such as fluorescence microscopy, clinical chemistry, spectroscopy, or machine vision inspection. Optical Filters are ideal for life science, imaging, industrial, or defense industries.
Optical Filter,Color Optical Filter,Custom Optical Filter,Custom Color Optical Filter
ChangChun Worldhawk Optics Co.,Ltd , https://www.worldhawk-optics.com