Control of moisture: Moisture is too large, it is prone to heat and mildew, and it is not resistant to storage. Therefore, the safe moisture of rice is the basis for safe storage. Before entering the warehouse, it should be naturally dried and the water should meet the safety standards (below 14%). Large, should be dried in time.
Removal of impurities: Rice usually contains scorpions, weeds, spikes, leaves, pods and other impurities and pods. These substances have high organic matter content, high hygroscopicity, bacteria, respiratory intensity, and instability. Impurities such as ash also reduce the porosity of the grain piles, and it is not easy to deposit them in the wet heat accumulation piles. These factors are unsafe for storage. Therefore, the impurity content must be reduced to less than 0.5% before storage, which can greatly improve storage stability. .
Timely ventilation: New rice often has strong breathing, high grain temperature or high moisture content. It should be ventilated in a timely manner, especially once the autumn cools, the temperature difference between the inside and outside of the grain pile is large. At this time, ventilation should be strengthened, and the grain moisture and heat must be distributed in combination with deep-transition grain surface. To prevent mildew, conditional mechanical ventilation can be used.
Low-temperature airtight: make full use of the cold and dry weather in winter to reduce the grain temperature to less than 10°C, reduce the moisture content to safety standards, and seal the airtight lid before the spring to allow summer weather.
Disclaimer: Some articles in this website have been transferred from the Internet. If you are involved in third party legal rights, please inform this website. phone
face mask used for daily protection, with 3 ply non-woven fabric, It can effectively filter droplets and block direct contact between virus and human body. The fabric is breathable and comfortable,it won't cause skin allergy.
We are professional manufacture of medical equipment with 6 years experiance.
The company conscientiously implements the "Regulations on the supervision and administration of medical devices" and other laws and regulations, and adopts a scientific management mode. The company has successively passed the EU CE certification and CFDA "medical device production quality management specification" assessment.
Adhering to the concept of "quality first, integrity-based, continuous change and long-term commitment", the company is committed to providing customers with high-quality, high safety performance products and high-quality services.
Disposible Face Mask,Face Mask With Logo,Face Mask With Designs,Disposable Medical Face Mask
Shanghai Rocatti Biotechnology Co.,Ltd , https://www.ljdmedicals.com