Disassembly and installation of the main parts of the single punching machine 1. Disassembly of the middle die plate: Pull out the powder retaining plate, remove the hopper, unscrew the set screw of the feeder, unscrew the fixed stud and spring of the feeder, and remove the feeding The middle die plate can be removed by unscrewing the middle die plate set screw and the spring washer. Installation: Refer to the reverse order above. Pay attention to alignment when screwing the feeder tightening screw. So as not to damage the wire hole of the feeder.
2. Disassembly of the upper punching rod: Loosen the connecting rod lock nut, turn the upper punching rod to disengage it from the connecting rod, turn the handwheel to raise the eccentric wheel shell to the high position of the zui, turn the eccentric shell to make the connecting rod swing to The upper punching rod can be pulled out from the upper side of the mold frame hole. Installation is performed in the reverse order described above.
3. Disassembly of the lower punching rod: Unscrew the lower punching fixing screw, the butterfly screw and the gear pressing plate rotate the adjusting gear, so that the lower punching core rod is lowered and taken out from the bottom hole of the fuselage. Installation: Refer to the reverse order above.
4. Connecting rod removal: first remove the upper punching rod, then remove the wire retaining ring on the connecting rod pin, take out the connecting rod pin, and then take off the connecting rod. Installation: Follow the reverse order above.
5. Large pulley, pinion and bridge axle disassembly: lower the V-belt, unscrew the right end of the bridge shaft and the washer (in the fuselage), and pull the large pulley together with the pinion and the bridge shaft. Then, the bridge shaft can be pulled out of the wheel hole. (The large pulley is integrated with the pinion and the bushing, and generally does not need to be disassembled). Installation: Refer to the reverse order above.
6. Spindle disassembly: The disassembly of the spindle should be carried out by two people. First remove the large pulley, then unscrew the nut to remove the lever, lever shaft and filling roller. (Remove the handwheel and camshaft if necessary) Remove the protective cover, unscrew the screws and washers, and use a wooden hammer to hit the non-working surface inside the large gear (not significant). Remove it (be careful not to lose the lifting roller), then hit the shaft end with a wooden hammer and a copper rod (be careful not to damage the shaft end screw hole), while holding the other end of the shaft and holding the eccentric wheel shell, slowly The spindle is removed.
Installation: Refer to the reverse order above.
Main products:
1. 5-ala: 5-ALA (CAS: 5451-09-2) is suitable for a wide range of scientific fields, such as increasing harvest yield or increasing plant green. Supplementary studies from animal cultures of microorganisms or cells related to reactive oxygen species produced from the accumulation of excess porphyrins are used for photodynamic diagnosis of cancer research.
2. Garlic Extract Allicin: allicin has a strong odor and spicy taste, and has immune and anti-fatigue functions. As a restorative herb, garlic can play an important role in balancing stressful life and tired body. In the veterinary field, it can treat respiratory infections and digestive diseases in poultry and livestock.
3. Sophora flavescens Extract: Matrine is an alkaloid extracted from the roots, stems and fruits of the leguminous plant Sophora flavescens by an organic solvent such as ethanol, and belongs to the class of quinolocilidine derivatives lupin alkaloids. Matrine has various pharmacological effects such as antibacterial, antiasthmatic, and white blood cells.
2. Disassembly of the upper punching rod: Loosen the connecting rod lock nut, turn the upper punching rod to disengage it from the connecting rod, turn the handwheel to raise the eccentric wheel shell to the high position of the zui, turn the eccentric shell to make the connecting rod swing to The upper punching rod can be pulled out from the upper side of the mold frame hole. Installation is performed in the reverse order described above.
3. Disassembly of the lower punching rod: Unscrew the lower punching fixing screw, the butterfly screw and the gear pressing plate rotate the adjusting gear, so that the lower punching core rod is lowered and taken out from the bottom hole of the fuselage. Installation: Refer to the reverse order above.
4. Connecting rod removal: first remove the upper punching rod, then remove the wire retaining ring on the connecting rod pin, take out the connecting rod pin, and then take off the connecting rod. Installation: Follow the reverse order above.
5. Large pulley, pinion and bridge axle disassembly: lower the V-belt, unscrew the right end of the bridge shaft and the washer (in the fuselage), and pull the large pulley together with the pinion and the bridge shaft. Then, the bridge shaft can be pulled out of the wheel hole. (The large pulley is integrated with the pinion and the bushing, and generally does not need to be disassembled). Installation: Refer to the reverse order above.
6. Spindle disassembly: The disassembly of the spindle should be carried out by two people. First remove the large pulley, then unscrew the nut to remove the lever, lever shaft and filling roller. (Remove the handwheel and camshaft if necessary) Remove the protective cover, unscrew the screws and washers, and use a wooden hammer to hit the non-working surface inside the large gear (not significant). Remove it (be careful not to lose the lifting roller), then hit the shaft end with a wooden hammer and a copper rod (be careful not to damage the shaft end screw hole), while holding the other end of the shaft and holding the eccentric wheel shell, slowly The spindle is removed.
Installation: Refer to the reverse order above.
Natural Field strives to develop low toxicity and environmentally friendly agricultural raw materials. They are popular in Europe and North America. We are proud of us: 5-ala, Physcion, Genistein and Triacontanol. Etc.
We're well-known as one of the leading agricultural raw materials manufacturers and suppliers for our quality products and good service. Please feel free to buy or wholesale bulk agricultural raw materials for sale at the best price from our factory.Main products:
1. 5-ala: 5-ALA (CAS: 5451-09-2) is suitable for a wide range of scientific fields, such as increasing harvest yield or increasing plant green. Supplementary studies from animal cultures of microorganisms or cells related to reactive oxygen species produced from the accumulation of excess porphyrins are used for photodynamic diagnosis of cancer research.
2. Garlic Extract Allicin: allicin has a strong odor and spicy taste, and has immune and anti-fatigue functions. As a restorative herb, garlic can play an important role in balancing stressful life and tired body. In the veterinary field, it can treat respiratory infections and digestive diseases in poultry and livestock.
3. Sophora flavescens Extract: Matrine is an alkaloid extracted from the roots, stems and fruits of the leguminous plant Sophora flavescens by an organic solvent such as ethanol, and belongs to the class of quinolocilidine derivatives lupin alkaloids. Matrine has various pharmacological effects such as antibacterial, antiasthmatic, and white blood cells.
Pesticides Growth Regulator,Agriculture Raw Material,Agricultural Raw Materials,Agricultural Raw Ingredients
Xi'an Natural Field Bio-Technique Co., Ltd. , http://www.nfingredients.com