The submersible mixer can set up water leakage protection and overload protection according to requirements. So what is overload? When the submersible mixer is running under overload (long-term continuous operation) load, the equipment will automatically stop running! So as not to burn out the motor! Similarly, if the internal machine seal or the bearing and the cable are damaged and the water is introduced into the device, the device will stop automatically to prevent the motor from being damaged by water!
Before inspecting and maintaining the components of the submersible mixer , make sure that the submersible mixer is disconnected from the power supply to ensure that it will not be accidentally started.
The first inspection cycle should be judged based on the wear of the agitator. If the parts are not or slightly worn, they should be inspected and repaired every 8,000 working hours or once a year; if there is severe wear, they should be inspected and repaired every 4,000 working hours or twice a year.
The overhaul period is also calculated based on the severity of the wear and tear. If there is no or slight wear, the overhaul period is usually five years or every 50,000 working hours; if the wear is serious, it should be every two years or no 20,000 working hours. Carry out a major maintenance inspection, and also indicate where repairs must be handled during the inspection process.
When inspecting and repairing the mixer , special attention should be paid to checking the condition of the impeller, because in the case of severe wear of the impeller, the leading edge imbalance will result, which in turn will cause the motor to be overloaded due to clogging.
Pumpkin Seed Kernels,Pumpkin Seeds Kernels Roasted,Shine Skin Pumpkin Seed Kernels,Pumpkin Seeds Or Kernels
Wuyuan county dafeng oil food co.,ltd , https://www.dafengfood.com.cn