Introduction to the correct use of vacuum packaging machine

Introduction to the correct use of vacuum packaging machine

Vacuum packaging machine Ten vacuum packaging equipment, using vacuum packaging machine packaging products, that is, the air inside the product is drained to maintain the vacuum inside the product, and when using the vacuum packaging machine, we also need certain precautions Although the method of operating the vacuum packaging machine is relatively simple, we still have to pay attention to it when using it.

The following is a brief introduction to the correct use of the vacuum packaging machine:

First, the preparation before use:

1. Place the vacuum packaging machine on the level ground and check that the vacuum cover can smoothly cover the lid;

2. Check that the power supply of the vacuum packaging machine is several phases;

3. Check if the position of the vacuum pump vacuum surface is correct. If it is not correct, adjust it (see the vacuum pump instruction manual for details).

4. Ground the vacuum packaging machine to prevent leakage.

5. Turn on the power, turn on the power switch, and close the cover to see if the vacuum pump is running normally.

Second, the adjustment before use:

1, adjust the vacuum

Vacuum packaging machine pumping time, digital display, continuous adjustable, small vacuum packaging machine pumping time for digital rotary 0-30 seconds adjustable. Adjust the length of the pumping time to achieve the required vacuum. To see the vacuum packaged products, adjust the vacuum time according to the product;

2. Adjust the heating temperature. Select the required heating temperature according to the material of the packaging bag, and adjust the heating temperature knob to the corresponding position.

3, adjust the heating time

Heating time, digital display, continuously adjustable, adjust the heating time knob according to the packaging material and heating temperature used, and choose the appropriate heating time.

Third, the precautions when using:

1. Turn on the power switch.

2. Open the bag of the package and put the package into the work room. Place the seal on the silicone rubber strip. Do not overlap the bag. Turn over the bag and press the bag. it is good.

3. Press down on the working chamber and close the cover. The machine will automatically complete the vacuum packaging process according to the program and automatically open the cover. Some equipments are equipped with an emergency stop switch.

4. Open the vacuum cover and take out the packaging bag to complete a working cycle.

5. Turn off the power switch and unplug the power plug when stopping work.

The above is the correct use of vacuum packaging machine introduced by Dahe Machinery. We must pay attention to safety when using vacuum packaging machine to prevent accidents. The failure rate of vacuum packaging machine is very low. When we use vacuum packaging machine We must pay attention to the operation of safety regulations. Shandong Dahe is a professional manufacturer of vacuum packaging machines. We supply various types of vacuum packaging machines. If you are interested in our products, we can look forward to your call.